Customer Advantages from a Crystal Quest Reverse Osmosis System

Comes with a complete installation kit that includes a European lead-free long-reach designer faucet, CRYSTAL QUEST® 4 gallons stainless steel pressurized holding tank with a polypropylene inner liner and a 3.2 gallon capacity, all interconnecting color-coded tubing, filter cartridges , Ultrafiltration membrane, RO membrane, wrenches and installation hardware.

Please Note: When considering installation, if current under sink plumbing is hard copper tubing the saddle valve would be used; for flex tubing the T-valve would be required. While ordering a prompt will require that an installation valve be specified in order to progress through the order entry screen.

WATER TRAVELS THROUGH 13 STAGES OF FILTRATION:

STAGE 1 - Water travels through a 5 micron solid carbon cartridge for removing volatile organic carbon compounds (VOC's), insecticides, pesticides and industrial solvents and traps particles larger than 5 micron including sediment, silt, sand and dirt. It also helps to extend the life of the system.

STAGE 2 - Water passes through a 0.2 micron Ultrafiltration (UF) membrane. Ultrafiltration (UF) is an important purification technology used for the production of high-purity water. UF is effective for the removal of colloids, proteins, bacteria, viruses, parasites, protozoa and pyrogens (e.g., gram-negative bacterial endotoxins), other organic molecules larger than 0.2 micron, and most other water contaminants known today. 

STAGE 3 - Water flows through pre one - micron filter pads (1 micron equals 1/25,000th of an inch), which removes suspended particles such as silt, sediment, cyst (Giardia, Cryptosporidium), sand, rust, dirt, and other undissolved matter.

STAGE 4 - Water passes through granulated activated carbon (GAC). GAC is universally recognized and widely used as an effective adsorbent for a wide variety of organic contaminants, such as chlorine (99.9%), chemicals linked to cancer (THM's, benzene) pesticides, herbicides, insecticides, volatile organic compounds (VOC's), PCB's, MTBE's and hundreds of other chemical contaminants that may be present in water, bad taste, and odors from your drinking water.

STAGE 5 - Water flows through the ion exchange resin, reducing heavy metals such as lead, copper, aluminum, and water hardness.

STAGE 6 & 7 - Water flows through 2 beds of Eagle Redox Alloy®(Oxidation/reduction process) media made of a special high-purity alloy blend of two dissimilar metals - copper and zinc. Representing a new and unique way of water processing medium which by its natural process of electrochemical oxidation/reduction and adsorption action reduces and/or removes many unwanted contaminants from water. It is a major advancement in water treatment technology that works on the electro-chemical and spontaneous-oxidation-reduction (Eagle Redox Alloy®) principles. Chlorine is instantaneously and almost inexhaustibly oxidized.

Iron and hydrogen sulfide are oxidized into insoluble matter and attach to the surface of the media. Heavy metals such as lead, mercury, copper, nickel, chromium, cadmium, aluminum, and other dissolved metals are removed from the water by the natural process of electrochemical process. They are attracted to the surface of the media, much like a magnet. The media inhibits bacterial growth throughout the entire unit. 

STAGE 8 - Water flows through another one-micron filtration pad for further reduction of undesirable particles. The end result is a great reduction or elimination of a wide variety of contaminants.

STAGE 9 - Water passes through a CRYSTAL QUEST® reverse osmosis membrane, which removes and filters particles as small as 1/10,000 of a micron as most inorganic chemicals (such as salts, metals, minerals) most microorganisms including cryptosporidium and giardia, and most inorganic contaminants. 

STAGE 10 & 12 - Water flows through another one - micron filter pads (1 micron equals 1/25,000th of an inch), which removes suspended particles such as silt, sediment, cyst (Giardia, Cryptosporidium), sand, rust, dirt, and other undissolved matter.

STAGE 11 - Water passes through granulated activated carbon (GAC).

STAGE 13 - Water travels through a 0.2 micron Ultrafiltration (UF) membrane. Ultrafiltration. UF is effective for the removal of colloids, proteins, bacteria, viruses, parasites, protozoa and pyrogens (e.g., gram-negative bacterial endotoxins), other organic molecules larger than .01 micron, and most other water contaminants known today.

• The influent waters psi will have a direct effect on GPD or gallon per day production. The RO is designed to work in a psi range from 35-60 with 60 being optimum. If your water pressure is low or you have a high TDS please consider a system manufactured with a pump.

Revolutionary breakthrough in the reverse osmosis and ultrafiltration industry

• Totally new most effective, healthiest Reverse Osmosis/Ultrafiltration systems in today market.
• Produce from 50 to 100 gallons of top quality water per day (GPD) and remove up to 99.9% of undesirable contaminants and filter particles as small as 1/10,000 of a micron by forcing untreated water through a semi-permeable membrane.
• Pressure forces the water to flow in the reverse direction to the direction of flow in natural osmosis.
• Compact designs that can easily fit beneath the kitchen sink.
• Complete installation kit (System Ships in Multiple boxes):
• European lead-free long-reach designer faucet,
• 4 gallons steel pressurized holding tank with a polypropylene inner liner and a 3.2 gallon capacity,
• All interconnecting color-coded tubing, filter cartridges, Ultrafiltration membrane, RO membrane,
• And installation hardware for easy installation.

Prior to Purchase - Customer Please Note:

1. When considering installation of an undersink unit: if under sink plumbing is hard copper tubing the saddle valve would be used; a flex tubing the T-valve would be required; or an ankle stop value foe metal mesh.
2. During the ordering process you will have a choice of which installation valve you prefer.
3. The influent waters psi (pounds per square inch) will have a direct effect on GPD or gallon per day production.
4. The RO is designed to work in a psi range from 50-60, 60 psi being optimum. Greater than 70-75 psi you will be generating greater waste water, and you may need a pressure reducer to prevent any damage.
5. If your water pressure is low or you have a high Total Dissolved Solids (TDS) please consider a system manufactured with a pump.
6. Units are manufactured with standard 110v electrical outlet.Units are manufactured standard with 110v electrical outlet but are also available in 220v if requested.